The Sparrow family consists of one or more Sensors which communicate JSON-formatted Notes using a LoRa radio to a Gateway with which they have been manually paired. A Sparrow Gateway will forward messages received from its paired Sensors to the cloud via Notecard. Conversely, it will also forward messages received from the cloud via Notecard to an associated Sensor.
...
Notecarrier | Sparrow Gateway | Qwiic Color |
|---|---|---|
<VIO | <VIO | RED |
GND | GND | BLACK |
SCL | SCL | YELLOW |
SDA | SDA | BLUE |
NOTE: If you have a Qwiic connector breakout, you can connect to the Qwiic connector of the Sparrow, and the same pins on the Notecarrier as above.
Connect to Notehub
If you are using a Wi-Fi Notecard, be sure to connect to your local network.
...
There are two ways to connect your project to Notehub (choose one):
Configure the Notecard to connect to your Notehub product directly over USB (as you normally would).
Code Block {"req":"hub.set","product":"<your_product_id>"}Update the
NOTECARD_PRODUCT_UIDvariable insparrow-lora/Application/config_notecard.hto force your Sparrow Applications to connect to the desired Notehub product.
...