...
NOTE: The Sparrow Essentials Board and Sparrow Reference Nodes run the same firmware, and you can use these steps this article’s instructions to update the firmware of each.
...
At this point you’ve now successfully updated the firmware on your Sparrow board. You can verify the installation succeeded by completing the following steps in a serial terminal application, such as CoolTerm or TerraTerm.
Connect to the STLINK-V3MINI serial terminal at 9600-8-N-1.
Press RESET button on Sparrow.
Verify the updated firmware by referencing the banner message (example shown below).
Code Block =================== ===== SPARROW ===== =================== Feb 24 2022 15:19:28
...
You can verify the installation succeeded by completing the following steps in a serial terminal application, such as CoolTerm or TerraTerm.
Connect to the STLINK-V3MINI serial terminal at 9600-8-N-1.
Press RESET button on Sparrow.
Verify the updated firmware by referencing the banner message (example shown below).
Code Block =================== ===== SPARROW ===== =================== Feb 24 2022 15:19:28